TracPlus Web User Guide

Starting TracPlus Web

To access TracPlus Web open your preferred internet browser and go to the TracPlus Web site https://www.tracplus.com/

TracPlus Home Page

Next, click on the red ‘Login' link at the top right of the web page to go to the login page. From here you are able to enter either TracPlus Web or My TracPlus.

Tip: If you see the standard Microsoft Security dialog, press no.

Web Logon

Select ‘Login’ to enter TracPlus Web.

Type in the username and the password of your TracPlus account. Tick the box ‘Remember Me’ if you want your browser to remember your login details.

If you do not have a Usercode, you will need to contact support@tracplus.com or call +64 03 477 8656 to obtain a Usercode.

The web page is split into 4 panels in which you can set parameters and see your assets tracking. Each panel’s width or size is customizable by mousing over the edge until the ‘two way’ arrow pops up; hold the left mouse button down to drag the edge until the desired size is reached.

Watchlist

Watchlist

The ‘Watchlist’ contains all the assets that you have visibility of. These are the ones you own, along with assets that other users are sharing with you.

The ‘Watchlist’ is further divided up with assets listed under the name of the respective operators. Clicking on the plus or minus sign in the box to the left of their operator’s name will either expand or contract the list of assets for that particular operator.

Right clicking on an asset in the Watchlist will open a sub menu from which you can do one of two things.

  • Send text message
  • Change standard rate

This is device dependent, as not all devices use these features. Whether these actions are available for any of the assets that others are sharing with you will depend on the level of permissions that they have set for you.

Calendar

Calendar

When TracPlus Web opens it will be automatically set to the current date, displayed as either local or UTC time, depending on what has been set under Preferences.

You can select any date by clicking on the left or right arrow and then selecting the day in that month. An alternative is to click on ‘Latest Reports’ which will take you to the last date that there was tracking for the selected asset.

If you have selected a date in the past, and you then select another asset, you will be see the tracking of the new selected asset on the date that you had previously chosen.

Layers

Layers

In the Layers panel you have two options; Map and Report. The ‘Map’ option gives you a choice of what type of map you will have displayed within the map window.

Map Layers

The ‘Report’ option allows you to turn off the trails for assets. This will just show the last recorded position of an asset. Tick to see the trails again.

Preferences

There are 5 optional settings under Preferences that you can make changes on.

Preferences

Performance:

  • Reports – How many position report displayed on the map. The higher the number, the more reports that you can see per asset. Higher numbers may affect performance due to increased data being downloaded.

Tracking:

  • Center on selection – This keeps the selected position report centered on the map, within your viewing area.
  • Follow selected asset – Follows the asset as it is moving.

Trails:

  • Fade trail with age – Ticking this means that the tracking trail will progressively fade depending on how recent or far in the past the tracking reports are.

Units:

  • Speed – Displays the assets speed in one of the three possible formats.
  • Height – Displays the altitude of the asset in one of two possible formats.

Regional:

  • Time – Select what time zone is displayed, in either UTC or Local.
  • Date – Select what date format is used for the tracking reports.

Tracking Reports

This panel displays the selected assets tracking reports for the selected day containing; the GPS fix, date, time, speed, heading and altitude.

Any text messages sent from a device will also be displayed within this panel.

Tracking Reports

The panel lists the GPS reports, from the latest reports at the top to the oldest at the bottom.

Map Pane

The map is the largest panel and can be adjusted to be bigger or smaller as desired. Depending on what map type you have selected, the map panel may look like the following.

Map Pane

The ‘Map Title Bar’ contains the selected asset name on the left hand side, with the date on the right hand side that the tracking is from.

The Tracking Report panel will display the tracking reports, trail and icon for the selected asset.

You can zoom in or out by using the mouse scroll wheel or the ‘Plus’ or ‘Minus’ keys on the keyboard. The directional keys on the keyboard will move the map around. You can also click and drag the map around with your left mouse click.

Additional Map Functionality

Additional Map Functions

On the bottom right of the map area is some icons for additional functionality.

The Plus and Minus symbols can be used for zooming in or out on the map.

Street View

Clicking on the Person symbol and then dragging them over on to the map and then dropping it onto a street, takes you into Google Street View. A left mouse click moves you forward and the mouse wheel zooms in or out of the image.

To return to map view, click on the left facing arrow at the top left of the viewing panel.

Additional Information:

Map Copyright, Terms of Use and Report a map error are used by Google, the map provider.

Scale:

The map scale depends on the zoom level.

Logging Out

Logging Out

To logout, just click on the Logout link at the bottom right of the page.

Should you have further questions please do not hesitate to contact either the TracPlus support team on support@tracplus.com or call +64 (3) 477 8656.

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.