Updating firmware on a RockSTAR

From time to time the manufacturer will release new versions of the software which runs on your GPS tracker (called firmware).  The latest firmware for a RockSTAR is version 3.9.16.

These will often provide minor bug fixes to address problems which have been discovered, and often include new features or adjustments to functionality.

Upgrading firmware should only be carried out after the advice of a member of our staff, or where directed by our documentation.

By upgrading you will be wiping the software and settings which makes the unit work, and replacing it with new software. In very rare circumstances, for instance if the upgrade is interrupted, it can result in a tracker becoming inoperable – we therefore advise that it should not be carried out immediately before you need to use it in the field!


RockSTAR Devices

To Upgrade the RockSTAR Firmware

  1.  Download and install the Rock7 Connect App. There is iOS and Android versions available
    Android version is available here Rock7 Connect Android 
    The iOS version is available here Rock7 Connect iOS
  2. Turn on either Network, Wifi or Mobile Data on your phone.
  3. Turn on Bluetooth on your phone.
  4. Start up the R7 Connect app on your phone.
  5. Tap 'Yes - this is my tracker' in the R7 Connect app. 
  6. Select the RockSTAR device from the list of available Bluetooth items.
  7. Go to Advanced->Firmware and tap 'Update.'
  8. Unlock the device with 1 2 3 4 and tap 'Unlock Device.'
  9. Tap 'Update' at the top right of the screen.

If there is a firmware update available, the RockSTAR will start downloading it through your phone's internet connection. This may take up to 15 minutes to complete and during this time the phone will need to remain in the proximity of the RockSTAR to finish the download.

Once the download is completed the RockSTAR will automatically start to install. This will take a couple of minutes and you may need to restart the app when completed.

The RockSTAR will now be upgraded with the latest firmware. To check what version is installed on the RockSTAR unit go to About->Firmware Version to see.

After upgrading, the tracker’s settings will be retained but we recommend that you double check your configuration and set your desired tracking frequency etc.

In the rare case that your RockSTAR becomes unresponsive after a firmware update please press and hold the red 'alert' button and the 'down' arrow for 20 sec. This will reset and restart the RockSTAR.

Should you have further questions please do not hesitate to contact the TracPlus support team on support@tracplus.com or call us on +64 (3) 477 8656.

Have more questions? Submit a request


Please sign in to leave a comment.
Powered by Zendesk